DTF Film

Use HEAVY PRESSURE! It should be hard to close your press!

PRESSURE IS SO IMPORTANT FOR PRESSING DTF!

Set heat press to the correct temperature. Keep in mind that every press is different. The instructions below are general guidelines and can vary from press to press. 

 300° to 320° for cotton.

 275° to 285° for polyester. 

Pre-press garment for 5 seconds.

Line up your transfer on the garment. Press for 15 seconds.  

Cover the design with parchment paper, a plain t-shirt or Teflon and repress for 7 to 10 seconds.

How to Care for Your Shirts with DTF?

Direct to Film transfers hold up extremely well when pressed and washed properly. 

Do not wash or dry on high heat. Low or Medium heat is fine. 

Do not use Fabric Softener! Using Fabric Softener will cause the transfer to crack. 

 

**Every heat press is different, it's best to check your heat press with a heat gun to ensure you have accurate temperature. 

**We are not responsible for incorrect pressing.